You can use it to send or stream data or images to the Peggy. (Note that the pins used to replace the serial port otherwise go to the I2C interface and to button b5 on the PCB. So, you’ll need to choose between I2C and Serial when you build it.)
JeeNodes are a collaboration between Modern Device and a talented and energetic engineer, Jean-Claude Wippler.
The JeeNode Kit contains all the parts needed to build a JeeNode v6 – including an ATmega328p processor and an RFM12B radio module. The processor chip is pre-flashed with the Arduino boot loader and the RF12demo sketch, so it works to talk to another JeeNode right out of the box. Kits are shipped with the ISM-band 915 or 434 MHz radio module for orders within the Americas
Flashback – Ports and I2C in JeeLib
The UART Plug contains a hardware serial port with 64-byte buffers for both sending and receiving. It can support baud rates up to 115200 baud, though this will probably tax the bus through which it is being accessed.
An I2C bus running at 3.3V is used as interconnect, with all the power and signal lines brought out to to both sides of the board to allow daisy-chaining with other I2C-conformant boards.
The two solder jumpers on the board allow up to four UART Plugs to be used together on the same I2C bus.
BeagleBone Black at Adafruit - $45
If you liked the BeagleBone, you will love the next gen BeagleBone Black! With a blistering 1GHz processor, 512MB onboard DDR3 RAM, built in 2GB storage with pre-installed Linux operating system (no microSD card required!), and best of all, the addition of a MicroHDMI connector for audio/video output. This is a ultra-powered embedded computer that can fit in a mint tin. Note: As of October 24, 2013, 11:15amET Adafruit is shipping Rev A6.
Waterproof Epoxy Gel 5m (16.4ft) 300xSMD3528 LED Flexible Strip with White Background
A coaxial power connector is an electrical power connector used for attaching extra-low voltage devices such as consumer electronics to external electricity. Also known as barrel connectors, concentric barrel connectors or tip connectors, these small cylindrical connectors come in an enormous variety of sizes.
Product Code: 3301
Universal single color LED dimmer can dim any 12VDC LED products from 0 to 100 percent using Pulse Width Modulation (PWM) circuit. Knob control for full intensity adjustment range. Maximum Load is 2 Amps, has Male and Female 5.5mm barrel power connector for connecting in-line with our CPS series Power Supplies.
Waterproof LED Driver Transformer 60 Watt 12V with 3-prong Plug
Cable Organizer dot com 3:1 Heat Shring tubing
Amazon - Techflex 1/2 F6 Split Sleeving 25 feet Black - $20.01
Amazon - Seasense Rope Cutting Gun - $33.71
LED Type SMD2833 |
LED Type SMD3015 |
LED Type SMD3528 3.5mm * 2.8mm. |
LED Type SMD5050 5.0mm x 5.0mm |
http://www.ledwholesalers.com/store/index.php?act=viewProd&productId=723
Bright LED Flexible Strip with 300xSMD5050 LED 16 Feet 5 Meter Nonwaterproof 12 Volt DC
$42.00
LED Quantity/Type 300xSMD5050
Input Voltage 12VDC
Power 72W
View Angle 120 Degrees
Available Colors White 5000-6000K Neutral White 4000-4500K Warm White 3100-3400K
Light Output (lumen) 3400 3230 3060
Length 16.4ft (5m)
Strip Width 10mm
http://www.ledwholesalers.com/store/index.php?act=viewProd&productId=474
16.4 ft / 5M Flexible LED Lighting Strip 300 SMD3528 with 3M Tape
$15.99
LED Type SMD 3528
Number of LEDs 300
View Angle 120 Degrees
Light Output
900-1100 lumen
Power 24W
Input Voltage 12VDC
Current 2A
Strip Width 8mm
http://www.ledwholesalers.com/store/index.php?act=viewProd&productId=755
High Color Render Index 300 SMD3528 LED Lighting Strip 16.4ft with 3M Tape 3100K Warm White
$38.00
LED Type SMD 3528
Number of LEDs 300
View Angle 120 Degrees
Lumen 900-1100 Lumen
Power 24W
Input Voltage 12 VDC
Current 2 Amps
Strip Width 8mm
http://www.ledwholesalers.com/store/index.php?act=viewProd&productId=619
16 Feet Double Density Flexible Light Strip with 600xSMD3528 LED 12 Volt
LED Quantity/Type 600xSMD3528
Input Voltage 12VDC
Power 48W
View Angle 120 Degrees
Available Colors White 5000-6000K Warm White 3100-3400K Warm White 2700-3100K
Light Output (lumen) 2200 1980 1870
Length 16.4ft (5m)
Strip Width 8mm
http://www.ledwholesalers.com/store/index.php?act=viewProd&productId=563
16.4 Feet 300xSMD3528 LED Flexible Strip with Waterproof Sleeve LED Ribbon 5 Meter Reel 12 Volt
$19.99
LED Quantity/Type 300xSMD3528
Input Voltage 12VDC
Power 24W
Current 2A
Lumens 900-1100
Viewing Angle 120 degrees
Length 16.4ft (5m)
Width 8mm (10mm including sleeve)
IP Rating IP66
http://www.ledwholesalers.com/store/index.php?act=viewProd&productId=843
IP68 Fully Submersible Waterproof LED Flexible Strip with 300xSMD3528 5m Reel
$36.00
LED Quantity/Type 300xSMD3528
Input Voltage 12 Volts DC
Power 24W
Light Output (lumen)
900-1100
IP Rating
IP68
Viewing Angle 120 degrees
Length 5m (16.4ft)
Strip Width 8mm (10mm including coating)
Warm White (3100K - 3400K)
White (5000K - 6500K)
http://www.ledwholesalers.com/store/index.php?act=viewProd&productId=748
Waterproof Decorative Side View LED Flexible Strip 16.4 Feet 300 SMD LED 12 Volt
$65.00
LED Type SMD3015
LED Quantity 300
Input Voltage 12 Volts DC
Power 15W
Light Output (lumen) 400-600
Viewing Angle 120 Degree
Length 16.4ft
Waterproof Rating IP66
Blue
Warm White (3100K - 3400K)
White (5000K - 6500K)
http://www.ledwholesalers.com/store/index.php?act=viewProd&productId=887
Waterproof Epoxy Gel 5m (16.4ft) 300xSMD3528 LED Flexible Strip with White Background
$24.00
Waterproof Rating
IP65
LED Type
SMD 3528
LED Quantity
300
Length
5m (16.4ft)
Width
8mm
View Angle
120 degrees
Light Output
900-1100 lumen
Power Consumption
24W
Input Voltage
12VDC
Input Current
2A
Warm White (3100K - 3400K)
White (5000K - 6500K)
http://www.ledwholesalers.com/store/index.php?act=viewProd&productId=847
Brightest Waterproof Fully Water Submersible RGB Color Changing Flexible Strip with 300 5050 SMD LED 12 Volt, 16.4 Feet
$75.00
LED Type SMD 5050 RGB
Number of LEDs 300
View Angle 120 Degrees
Lumen 1600
Watt 72 Watts
Input Voltage 12 Volts DC
Current 6 Amps
Width 14mm
http://www.ledwholesalers.com/store/index.php?act=viewProd&productId=996
Water-Resistant IP65 Flexible LED Light Strip with 300xSMD2833 16.4 Ft and 3M Adhesive, White PCB Backing
$48.00
LED Quantity/Type 300xSMD2833
Input Voltage 12VDC
Power 28W
View Angle 120 Degrees
Available Color Temperatures White
5000-6500K Warm White
3100-3400K
Light Output (Lumen) 2900 2700
Width 10mm
Length
16ft
PCB Color
White
Waterproof Rating
IP65
http://www.ledwholesalers.com/store/index.php?act=viewProd&productId=550
Waterproof LED Driver Transformer 60 Watt 12V with 3-prong Plug
$28.00
http://www.ledwholesalers.com/store/index.php?act=viewProd&productId=603
Waterproof LED Driver 150 Watt 3 Prong Plug, 12 Volt Dc
$68.00
Seen on ebay - 5 feet stranded 30 AWG Silver Teflon Wire Yellow White
Stranded copper hookup wire for general wiring that may be subject to repeated vibration or flexing that can lead to breaks in solid wire. The wire consists of 7 strands of 34ga wire. Each strand is individually tinned to minimize oxidation and ease soldering without reducing flexibility. PVC insulation rated to 300v. Maximum recommended current 2.2A. UL style 1007. Outside diameter .051”.
$0.30 / ft
Priced Per Foot. Weight:0.00 Regular Price: $0.44 Micron’s Web Price: $0.42
$0.29 / ft
Digikey - Alpha Wire - 5851 RD005
Digikey - Alpha Wire - 3047 BK005 - 30awg PTFE insulation - 100ft.
$37.44 / 100 ft
Perfect for bread-boarding, free wiring, etc. This box contains 6 spools of solid-core wire. The wire is easy to solder to and when bent it keeps its shape pretty well. We like to have a few spools of this stuff around which is why this set is quite nice! We suggest picking up wire strippers to match. Wire gauge is 22 AWG which we’ve found is the best all-around gauge, it works best with breadboards and perfboards but also fits in terminal blocks nicely
This box has a wooden dowel rod to hold the spools in place and let them spin, and there are little punch-outs you can pass the wire through so its it’ll stay nice organized.
For TS I use Gepco GLC20, and for TRS I use Gepco X-Band XB201M. Can’t forget the switchcraft 280 and 297 connectors either!
Belden 8410 for TS, Belden 8412 for TRS/XLR
Canare L4E6S and Neutrik connectors for for internal rack wiring.
L-4E6S The premier Star Quad cable for all handheld microphone applications. Flexible, satin smooth to the touch and extra strong, this standard diameter, 21 AWG cable fits perfectly in all XLR-type audio connectors. Forty separate strands in each conductor eliminate breakage due to flexing. Available in 10 beautiful matte finish color jackets.
L-4E5C A narrow profile version of L-4E6S. Specifically designed to save space and reduce weight during remote field expeditions or confining installations.
$0.55 / ft
Highest signal isolation, unbelievable flexibility and durability. Special no-glare cable jacket. Used by America’s leading soundmen and audio engineers. The first choice for hand-held microphones.
Flexible, smooth to the touch, extra-strong standard diameter (21 AWG) STAR QUAD cable that fits perfectly in all XLR-type connectors. With 40 separate strands in each conductor, breakage due to flexing is all but eliminated. Available Colors: Black, Blue, Brown, Grey, Green, Purple, Orange, Red, Yellow, White. Sold Per Foot or by the roll. Quantity Discounts Apply, Please Call For Pricing !!
Applications:
Features:
Miniature size 22 AWG version of GS-6. Good choice for short run unbalanced audio interconnects and general instrumentation cables.
Canare GS-4 Guitar / Keyboard / instrument Cable
L-2B2AT Canare’s thinnest profile audio hookup wire. Amazingly flexible, with 100% foil shield, drain wire and PVC jacket that strips easily for rapid assembly. Suitable for large cable harness bundles, mixing consoles, tape machines and inner-rack wiring.
$0.59 / ft.
The Mogami name is synonymous with high quality and is used worldwide in the best recording studios. With a diameter of only 3mm / 0.118 inches, this cable was designed for excellent sound in a compact package. Using high purity copper shielding ensures very low noise, while the high purity copper center conductor conveys ultimate tone. Special nylon tensile strengtheners inside the conductor yield mechanical strength that is much higher than any comparable diameter cable. The cross-linked polyethylene dielectric is heat resistant and will not shrink as quickly as pvc. If you want the best wire to go from your front panel controls to your preamp tubes, then this is it. Another cool aspect of this cable is it uses low noise cross link poly insulation, so is relatively non microphonic in high impedance circuits…like tube amps.
Industry standard balanced audio cable for permanent installation. Stranded tinned-copper conductors are easy to solder or punch-down. A high grade polyethylene dielectric is used to minimize high frequency attenuation, while excellent process control and tight pair twisting achieves superior noise rejection. Foil shield with same gage drain wire facilitates quick shield termination. Twentytwo gage conductors offer the lowest DCR available in any Gepco single-pair product. Ideal for punch-down, rack wiring, and extended distance runs of mic level signals.
72401EZ 1 24 AWG (7X32) Stranded
Thin profile, balanced audio cable for applications that require a reduced diameter and/or weight. Stranded tinned-copper conductors are easy to solder or punch-down. A high-quality polyethylene insulation minimizes cable capacitance in conjunction with excellent process control and tight twisting for superior noise rejection. Foil shield with same gage drain wire facilitates quick shield termination. Twenty-four gage conductors are easier to terminate while still maintaining low DCR. Ideal for patchbay wiring or mobile production trucks.
http://www.amphenolaudio.com/Amphenol_RCA.html
Parts Express has colors: red | black | white | yellow |
The heavy duty professional phone plug series improves on the design of the existing C series by offering the thinnest available A-gauge 1/4” plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88mm jack pitch).
The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off the tip.
The Plug X Series serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixing desks.
PartsExpress - Neutrik NP2X Plug 1/4” Mono Nickel/Silver - $2.95 http://www.parts-express.com/neutrik-np2x-plug-1-4-mono-nickel-silver–092-316
PartsExpress - Neutrik NP2X-BAG Plug 1/4” Mono Black/Silver - $2.95 http://www.parts-express.com/neutrik-np2x-bag-plug-1-4-mono-black-silver–092-318
PartsExpress - Neutrik NP2X-B Plug 1/4” Mono Black/Gold - $3.29 http://www.parts-express.com/neutrik-np2x-b-plug-1-4-mono-black-gold–092-317
PartsExpress - Neutrik NP2C/B 1/4” Mono Plug Black with Gold Plug - $3.58 http://www.parts-express.com/neutrik-np2c-b-1-4-mono-plug-black-with-gold-plug–092-107
See TubeDepot, Markertek, PartsExpress, …